Subject: Your eRequest for e-Connect has been completed.
From: [email-masked]
To: [email-masked], [email-masked], [email-masked], [email-masked], [email-masked], [email-masked], [email-masked], [email-masked], [email-masked], [email-masked], [email-masked]
Cc: [email-masked], [email-masked], [email-masked]
Date: Tue, 15 Jan 2002 09:55:48 -0800 (PST)

Your eRequest for eConnect has been completed.
	-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

	In order for eConnect to work you need to meet some criteria.  Depending on the operating system, you may need to download additional 	components for eConnect.  Please check the following link and check if you meet this criteria:  	http://itcentral.enron.com/Data/Projects/eConnect/M7727/

Windows 2000:
	      ?	If you already have Internet access away from your office, i.e...high-speed internet connection such as DSL or cable modem: 
		You need to install the attached eConnVPN.exe client.
							  
	      ?	If you are dialing in: 
		You need to create a Dial-Up connection (Please see instructions attached Dial In Instructions.doc) using either number listed below. You must be 		            sure to append the domain name to the user id (i.e.. CORP\rbarker) for the connection to be successful.  	
					Please use 713-440-4221 or 866-295-3813 for dial-up access.

Windows 9x:

Dial-Up access is working provided that Dial-Up Networking version 1.4 is installed on the system.  Dial-Up Networking version 1.4 can be downloaded from http://support.microsoft.com/default.aspx?scid=kb;EN-US;q285189.  Follow the instructions for installation.  VPN access for Windows 9x has not yet been verified.  Dial-Up connections using either number listed above should be setup using the default settings.

Windows NT:

Dial-Up access for Windows NT4 is working provided that Service Pack 6a has been installed on the system.  Service Pack 6a may be obtained from http://www.microsoft.com/ntserver/nts/downloads/recommended/SP6/128bitX86/default.asp. Follow the instructions for installation.  VPN access for Windows NT4 has not yet been verified.  Dial-Up connections using either number listed above should be setup using the default settings.

This information is also available on the ETS Solution Center website at http://www.ets.enron.com/Services/Solution_Center/default.asp under Quick Reference - Remote Access.

Thanks!
Lupita Cantu
ETS Information Risk Management
713-853-3876