Message-ID: <13243278.1075841980821.JavaMail.evans@thyme> Date: Thu, 10 May 2001 11:38:00 -0700 (PDT) From: v.weldon@enron.com To: matthew.tezyk@enron.com, mike.coleman@enron.com Subject: Re: Fuel Specification Requirements Cc: mark.breese@enron.com Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Bcc: mark.breese@enron.com X-From: V Charles Weldon X-To: Matthew Tezyk , Mike Coleman X-cc: Mark Breese X-bcc: X-Folder: \ExMerge - Weldon, V. Charles\'Sent Mail X-Origin: WELDON-V X-FileName: v charles weldon 7-2-02.PST ---------------------- Forwarded by V Charles Weldon/HOU/ECT on 05/10/2001 08:38 AM --------------------------- From: Marc De La Roche 05/10/2001 07:39 AM To: Doug Leach/HOU/ECT@ECT, V Charles Weldon/HOU/ECT@ECT cc: Subject: Re: Fuel Specification Requirements HHV is not the proper terminology, Gross Heat of Combustion is. The following is for Light diesel. First number is min, second is max. Jet fuel should be in the same ballpark as Light Diesel. Gross Heat of Combustion is about 6.4% higher than Net Heat of Combustion (incorrectly referred to as LHV), so divide the Gross numbers by 1.064 to obtain Net numbers. Gross Heat of Combustion, Kcal/Kg D-240 or D-4868 10,820 10,966 Gross Heat of Combustion, BTU/Lbs D-240 or D-4868 19,520 19,780 Marc From: Doug Leach 05/09/2001 05:23 PM To: Marc De La Roche/HOU/ECT@ECT cc: Subject: Re: Fuel Specification Requirements Could you forward this info to Charlie? Copy me. ---------------------- Forwarded by Doug Leach/HOU/ECT on 05/09/2001 05:22 PM --------------------------- Enron North America Corp. From: V Charles Weldon 05/09/2001 05:09 PM To: Doug Leach/HOU/ECT@ECT cc: Subject: Re: Fuel Specification Requirements Doug, Thanks for the info. I have passed it along. I have one more question regarding heating values. Do you know what the LHV and HHV values are for #2 and jet fuel? I figure those are parameters that are measured and known but they weren't on the spec sheet. Thanks, Charlie