Subject: RE: California Regions
From: [email-masked]
To: [email-masked]
Cc: [email-masked], [email-masked], [email-masked]
Date: Fri, 3 Aug 2001 13:50:52 -0700 (PDT)

Cara,
	Looking into the Physical and Bookout summary reports, upon recreating the functionality there are certain sections to the report which we aren't clear on.. we are still needing to know which delivery points to map the following summary sections to:

	COB
	PV 		[Currently mapped to PALO VERDE]
	MIDC 		[Currently mapped to MID COLUMBIA]
	NWMISC
	SWMISC
	California	[Currently mapped to  NP-15, SP15 and ZP26]

	We've recreated the reporting functionality [excel based]  from within our new application.. and upon obtaining these mappings we can push this out to production for ya'll  asap.  If you'd like to have the summary report information dumped into the 'Aggregate Schedule Volume Report' we can definitely do that; but, would require us more time to get that functionality to you. 

thanks
Asem
x31700

 -----Original Message-----
From: 	Venkataswami, Vishwanatha  
Sent:	Friday, August 03, 2001 11:42 AM
To:	Atta, Asem
Subject:	California Regions

 -----Original Message-----
From: 	Semperger, Cara  
Sent:	Friday, August 03, 2001 11:35 AM
To:	Bentley, Corry; Poston, David; Smith, Will; Venkataswami, Vishwanatha
Subject:	RE: Outstanding Issues with Pre-Schedule and Path Confirmation

 The "California" region choice will be a combination of R10-R11and R12. (NP-15, SP15, and ZP26 respectively)  

I do not know the desks that control anything on the list below, those all look just like emissions credit desks, which would not be handled by anyone here.

West Power is as Follows
California (as defined above) - EPMI ST-Cali and EPMI LT-Cali
WSCC-S and Rockies:  EPMI ST-SW and EPMI LT-SW
WSCC-N and Northwest: EPMI ST-NW and EPMI LT-NW.

Please note:  Any desk here can trade any point, so even though the STSW has primary control over the daily trades, the body of trades will have probably all desks represented in it.

 -----Original Message-----
From: 	Venkataswami, Vishwanatha  
Sent:	Friday, August 03, 2001 9:18 AM
To:	Bentley, Corry; Semperger, Cara
Subject:	RE: Outstanding Issues with Pre-Schedule and Path Confirmation

Corry,

I will include regions "R1" to "R6's " in EAST desk,
and  WSCC-S, WSCC-N, Rockies, Northwest, California regions in West desk.

Cara : What is the  region code for California?

apart from that  the following regions belong to which desk?

	RgCd   Rg Name
1	CBA	Bay Area (CO)
2	CSC	South Coast (CO)
3	CSJ	San Joaquin Valley (CO)
4	CSM	Sacremento Metro (CO)
5	CTN	Texas National RES (CO)
6	GAS	NYMEX
7	NBA	Bay Area (NOX)
8	NOX	NOx
9	NRE	Reclaim (NOX)
10	NSC	South Coast (NOX)
11	NSJ	San Joaquin Valley (NOX)
12	NSM	Sacremento Metro (NOX)
13	NTN	Texas National RES (NOX)
14	PBA	Bay Area (PM)
15	PSC	South Coast (PM)
16	PSJ	San Joaquin Valley (PM)
17	PSM	Sacremento Metro (PM)
18	PTN	Texas National RES (PM)
19	SBA	Bay Area (SOX)
20	SO2	SO2
21	SRE	Reclaim (SOX)
22	SSC	South Coast (SOX)
23	SSJ	San Joaquin Valley (SOX)
24	SSM	Sacremento Metro (SOX)
25	STN	Texas National RES (SOX)
26	VBA	Bay Area (VOC)
27	VSC	South Coast (VOC)
28	VSJ	San Joaquin Valley (VOC)
29	VSM	Sacremento Metro (VOC)
30	VTN	Texas National RES (VOC)
31	Y2K	Y2K TEST

 -----Original Message-----
From: 	Bentley, Corry  
Sent:	Friday, August 03, 2001 10:08 AM
To:	Venkataswami, Vishwanatha
Subject:	RE: Outstanding Issues with Pre-Schedule and Path Confirmation

How about all in East (ie: "R1's to R6's" ).
CB

 -----Original Message-----
From: 	Venkataswami, Vishwanatha  
Sent:	Friday, August 03, 2001 9:09 AM
To:	Bentley, Corry
Cc:	Semperger, Cara; Smith, Will; Atta, Asem
Subject:	RE: Outstanding Issues with Pre-Schedule and Path Confirmation

Corry,

Please give me the list of Region choices you want to see in Path Cut Detail View. 

Cara is looking for  WSCC-S, WSCC-N, Rockies, Northwest, California regions in West desk.

Thanks,
Vish
x 53209

 -----Original Message-----
From: 	Semperger, Cara  
Sent:	Tuesday, July 31, 2001 10:39 AM
To:	Bentley, Corry; Poston, David; Smith, Will; Venkataswami, Vishwanatha
Subject:	RE: Outstanding Issues with Pre-Schedule and Path Confirmation

Please see my comments in blue

What follows are known issues with the Path Confirmation Report.

Path Confirmation Report:
Fixed Need to enable text wrapping for Path field.  The Path field is the most important field of which to see all data. Right now some paths are wrapped, and some aren't.   
Fixed Can we add a "master-detail" setup when soring by Tag.  Provide a list of tags and show data for selected Tag.
Fixed  Sorting by Global ID - This needs to be able to be done in the upper Sort area.  This is unclear.  What is meant by the upper Sort area? The area where we can drag and shuffle sort criteria, up above the regular line view. 
Fixed Not able to see the entire path in the "expanded view".  Also, delivery points are not showing up. Yesterday, I found that if a delivery point on the sheet is not exactly what Enpower has (ie: Midway instead of Midway-PSC), the expanded view just gets rid of it completely. Perhaps this should be an error-checking point? 
Done Find out to what the greyed out name in the expanded view is related. Just getting rid of that unrelated name is enough.   
Fixed Extend the size limit of the path.
We need to find out if the existing data was blown away purposefully or if this was accidental. In the last release, only the data from 6/23 was preserved from the previous version.
The POR/POD fields are still the same. We would like the delivery point selection to mimic the same functionality as the delivery point selection we see in Scheduling. 
Fixed, Press Enter or Seelct the date from the drop down Pulling up the proper date with the calendar is slow when there is data populated into the system. We need to make sure that the selection process does not get incrementally slower with each additional day of data that is added.
Fixed  For some reason, a gobal ID is showing up in the expanded view in lines where there is not a Global ID provided. It is always the same one: CISO_EPMI_5001.

Path Cuts:
Need to filter Region list for cuts by trading desk (East or West).
Allow hour ranges in the Hour # field specifically in HE 0000 (military) format (e.g.  0200-0400 or 1000-1400).
Must allow string values to be stored in the annuity field.
Fixed Transmission should be optional (Confirm with Cara)
Fixed Make it easier to show all cuts for a path.
Added Copy Path Cut Button, it stores all selected path_cut ino, change the required hour and save it.   Allow incremental hours to a cut, as hourly cuts can go on for several hours but one hour at a time. A new tag might have to be made each hour of the cut.  I'm not quite sure what you are asking for.  Can you give a little more detail? If I create a cut for a single hour, I would like to show additional hours in the same cut at a later time. Kind of an 'add-on' to the original cut. 
This application will go through a final evaluation by the real time departments, and I expect that they will need features that I have not been able to anticipate. My plan is to get as many of their needs met as possible before turning testing over to them, they are aware of this and the time table that we all are trying to meet. I will also help them with their testing to articulate their needs to you in the most efficient way possible. 
In the cut view, the region is still the cumbersome drop down list. This needs to be a forced choice option, like the hour-ahead vs. real-time selection.  The choices for the west are : WSCC-S, WSCC-N, Rockies, Northwest, California. Corry will be able to provide his region choices.
Fixed The path that has been cut needs to be able to pull up the cut note without hunting for it in the Cut Path view. The suggestion of a "Go to Cut" button was made in an earlier e-mail.

Let me know if there is anything that I have missed.

Thanks,
Will